Piaggio X9. Changing the oddometer display to show miles. Re-setting service lights.

Two separate panels. Analogue panel with speedo, rev counter, fuel and temperature gauges. Digital panel with warning lights and 4 buttons. Trip, M, Clock and set.

Changing the oddometer display to show miles.
1. Press and hold the TRIP and M buttons.
2. Turn on the ignition.
3. Release the buttons
4. The display will now show “miles”.

Service Icons.
There are three icons on the display to remind the owner that certain servicing is due. These lights are controlled by elapsed mileage and elapsed time so it is important to set the date correctly.

OIL: Comes on after first 1000km (625 miles) and then after every 3000km
SERVICE: Comes on after first 1000km and then after every 6000km.
This light also comes on after one year even if the distance has not been covered.
BELT: Comes on after every 18000km.

Re-setting service lights.
If one or more of the service lights is flashing follow this procedure:

Remove the central panel between the headlights, 5 cross head screws retain this.
You will find a button above the headlight unit marked “RES”
Turn on the ignition. At least one of the three service lights will be flashing.
Briefly press the button to select the light before the one you want to reset. Briefly pressing the button allows you to scroll through the light to make the selection. When you have the light before alight, then:
Press and hold the button. The light will first jump to the light you want to reset then it will start flashing faster. While it is flashing fast release the button. Now the light should have gone out.
Turn off the ignition and turn back on to prove the light has been cancelled.

If you have another light to reset; repeat the above steps. Don’t forget to reset the service lights when you do a service, even if they are not flashing.